-40%

Ultrasonic Sensor UC4000-30GM-IUR2-V15 For Pepperl Fuchs

$ 166.66

Availability: 93 in stock
  • Current Type: DC
  • Condition: New
  • Brand: Unbranded

    Description

    Ultrasonic Sensor UC4000-30GM-IUR2-V15 For Pepperl Fuchs
    Welcome contact for available wholesale price, thank you!
    DESCRIPTION
    Excerpted technical parameters from the parameter table UC4000-30GM-IUR2-V15
    General characteristics
    Sensing distance: 200 ... 4000 mm
    Adjustment range: 240 ... 4000 mm
    Dead zone: 0 ... 200 mm
    Standard target board: 100 mm x 100 mm
    Transducer frequency: approx. 85 kHz
    Response delay: minimum 145ms
    Factory setting is 440ms
    Indicator light/operation key
    Green LED: Steady on: Power on
    Blinking: Target detected in standby mode or TEACH-IN function
    Yellow LED 1 is always on: the target is within the detection range
    Flashing: TEACH-IN function
    Yellow LED 2 is always on: the target is within the detection range
    Flashing: TEACH-IN function
    Solid red LED: temperature/setting plug not connected
    Blinking: Error or no target detected in set state
    Temperature/TEACH-IN connector Temperature compensation , Evaluation range programming , output function setting
    Electrical Characteristics
    Operating voltage: 10 ... 30 V DC , ripple 10 %SS
    Power consumption: ≤ 900 mW
    interface
    Interface type: RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
    input/input
    Sync: Bidirectional
    0-level -UB...+1 V
    1-level: +4 V...+UB
    Input Impedance: > 12 KOhm
    Sync pulse: ≥ 100 μs, Sync pulse period: ≥ 2 ms
    Sync frequency
    Normal working mode max. 13 Hz
    Multimode ≤ 13 Hz / n , n = number of sensors , n ≤ 5
    output
    Output type: 1 current output 4...20mA
    1 channel voltage output: 0...10V
    Resolution: evaluation range [mm]/4000, but ≥ 0.35 mm
    Characteristic curve deviation: ≤ 0.2 % of full-scale value
    Repeatability: ≤ 0.1 % of full-scale value
    Load impedance: current output: ≤ 500 Ohm
    Voltage output: ≥ 1000 Ohm
    Temperature drift: ≤ 2 % from full-scale value (with temperature compensation)
    ≤ 0.2 %/K (without temperature compensation)
    Licensing and Certification
    UL Listed cULus Listed, General Requirements
    CSA Certification cCSAus Listed, General Purpose
    CCC Approval Products with a maximum operating voltage of 36 volts do not require approval approval and therefore do not require the CCC-Mark.
    surroundings
    Ambient temperature: -25 ... 70 °C (-13 ... 158 °F)
    Storage temperature: -40 ... 85 °C (-40 ... 185 °F)
    Mechanical properties
    Wiring Type: Connector M12 x 1 , 5-pin
    Protection class: IP65
    Material
    Housing: stainless steel 1.4305
    Plastic part PBT
    Transducer Epoxy/hollow glass sphere blend; polyurethane foam
    Weight 210 g
    PACKAGE INCLUDES
    1* Sensor
    ESTIMATED DELIVERY TIME
    We will ship within 1-5 days after payment.
    - Economy: 15-60 days
    - Standard: 10-35 days
    - Expedited: 4-7 days
    Note: Average delivery time for reference only, actual time varies for different countries and related to uncontrollable factors such as weather, natural disasters and pandemic.
    WARRANTY
    - Exchange/replace item within 30 days
    counting from the day you receive merchandise.
    - Buyer pay the return shipping cost.
    - Exchange/replace item should be new.
    CONTACT US
    Please do not leave neutral or negative feedback,
    If you have any questions, please contact us,
    Our aim is to provide top level customer service,
    Normally so we will try our best to solve any problem.
    We reply your ebay message within 24 hours, thank you!