UC2000-30GM-IUR2-V15 For Pepperl Fuchs Ultrasonic Sensor

Description

UC2000-30GM-IUR2-V15 For Pepperl Fuchs Ultrasonic Sensor
DESCRIPTION
Model: UC2000-30GM-IUR2-V15
Type: Ultrasonic Sensor
Parameters Table:
General characteristics
Sensing distance: 80...2000 mm
Adjustment range: 120 ... 2000 mm
Dead zone: 0 ... 80 mm
Standard target board: 100x100 mm
Transducer frequency: approx. 180 kHz
Response delay: minimum 65ms
Factory setting is 195ms
Indicator light/operation key
Green LED
Steady on: power on
Blinking: Target detected in standby mode or TEACH-IN function
Yellow LED 1
Steady on: The target is within the detection range
Flashing: TEACH-IN function
Yellow LED 2
Steady on: The target is within the detection range
Flashing: TEACH-IN function
red LED
Steady on: The temperature/setting plug is not connected
Blinking: Error or no target detected in set state
Temperature/TEACH-IN connector Temperature compensation , Evaluation range programming , output function setting
Electrical Characteristics
Operating voltage: 10 - 30V DC
Power consumption: ≤ 900 mW
interface
Interface type: RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
input/input
two-way
Synchronize
0-level -UB...+1 V
1-level: +4 V...+UB
Input Impedance: > 12 KOhm
Sync pulse: ≥ 100 μs, Sync pulse period: ≥ 2 ms
Sync frequency
Normal working mode: max. 30 Hz
Multi mode: ≤ 30 Hz / n , n = number of sensors , n ≤ 5
output
output type
1 current output 4...20mA
1 channel voltage output 0...10V
Response delay: < 150 ms
Resolution: evaluation range [mm]/4000, but ≥ 0.35 mm
Characteristic curve deviation: ≤ 0.2 % of full-scale value
Repeatability: ≤ 0.1 % of full-scale value
Load impedance: current output: ≤ 500 Ohm
Voltage output: ≥ 1000 Ohm
Temperature Drift:
≤ 2 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation)
surroundings
Ambient temperature: -25 ... 70 °C (-13 ... 158 °F)
Storage temperature: -40 ... 85 °C (-40 ... 185 °F)
Mechanical properties
Wiring Type: Connector M12 x 1 , 5-pin
Protection class: IP65
Material
Housing: stainless steel 1.4305
Plastic part PBT
Transducer: epoxy/hollow glass sphere blend; polyurethane foam
Weight: 170 g
PACKAGE INCLUDES
1* Sensor
ESTIMATED DELIVERY TIME
We usually ship orders within 1-5 business days after payment.
- Economy: 15-60 days
- Standard: 10-35 days
- Expedited: 4-7 days
Note: Average delivery time for reference only, actual time varies for different countries and related to uncontrollable factors such as weather, natural disasters and pandemic.
WARRANTY
- Exchange/replace item within 30 days counting from the day you receive merchandise.
- Buyer pay the return shipping cost.
- Exchange/replace item should be new.
CONTACT US
We reply your ebay message within 24 hours,
T
hank you!