KEYENCE FW-V25P Amplifier Unit PNP & FW-H02 ULTRASONIC SENSOR + CABLE/CONNECTORS

Description

Keyence
Amplifier Unit PNP
with Model FW-H02 Ultrasonic Sensor (2) cables with plug & connectors
Model
FW-V25P
Current consumption
When connected with the FW-H02/H07
Normal
1680 mW (70 mA) or less
*1
Power save
1370 mW (57 mA) or less
*1
When connected with the FW-H10R
Normal
2640 mW (110 mA) or less
*1
Power save
2330 mW (97 mA) or less
*1
Display power
Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm, red; lower characters: 5.7 mm, green), display update cycle: 10 times/sec. (5 times/sec. when averaging the display)
Operation status indicators
Red LED × 2 (corresponding to control output 1 and control output 2), green LED × 2 (display channel indicators)
Chattering prevention function
Off, 0.5, 1, 2, 5, 10 s selectable (When the FW-H10R is connected, this is selectable between off, 1, 2, 5, and 10 s.)
Bank/external shift input
No-voltage input (with contacts, without contacts), input time: 25 ms or more (switchable with analog output)
Control output
Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)
Protection circuit
Reverse polarity protection, overcurrent protection, surge absorption
Analog output
4 to 20 mA, maximum load resistance: 260 Ω (switchable between bank and external shift input), output ripple (P-P) when workpiece is stationary: 2% of F.S. or less
Rating
Power voltage
24 VDC, ripple (P-P): 10% or less
Environmental resistance
Operating temperature range
-10 to 55°C
14 to 131°F
, No freezing
Operating ambient humidity
35 to 85% RH (No condensation)
Vibration
10 to 55 Hz, double amplitude: 1.5 mm
0.06"
, 2 hours each in the X, Y, and Z axis
Material
Main unit and cover: polycarbonate, key tops: elastomer
Accessories
Panel mounting bracket, Protective front cover, Power cable, Instruction manual
Weight
Approx. 85 g